Bag Sealer

Request a Quote for this item!

Manufacturer

Roscher

Model

RW-SVM-S1600

Subcategory

Horizontal

Description

Used: Roscher Continuous Horizontal Vacuum Packager Model RW-SVM-S1600 for sealing 1 to 10 lb, pre-filled, flat-bottom bags. Packager is LESS Busch Vacuum Pump, Type RA-0630-B-413-ZZZ. Bags are discharged from a vertical form/fill/seal bagger (VFFS is not included) and conveyed to the vacuum packager. UNIT INCLUDES: 1) MODICON SERIES 984-120 MODEL 145 PLC CONTROLLER 2) FORMING PLATES WITH BOTTOM VIBRATION & BOTTOM FORMING 3) BAG FORMING TAPERED CONVEYOR SYSTEM ( 1500 mm LONG ) WITH TWO (2) LATERAL VERTICAL CONVEYOR BELTS ( 600 mm HIGH ) TO RESHAPE BAGS 4) INVERTED U-FORMED PRE-STORAGE CONVEYOR; 5) MOTOR DRIVEN DOUBLE PUSHING UNIT FOR BAG TRANSFER INTO AND OUT OF VACUUM CHAMBER 6) DUAL 8 mm WIRE SEAL BARS TO MAKE AN AIR-TIGHT HORIZONTAL SEAL ON TOPS OF BAGS 7) EASY BAG SIZE ADJUSTMENTS (NO TOOLS NEEDED) 8) 32" FIXED CONVEYOR ELEVATION 9) 440 VOLT, 60 HZ, 3 PHASE, 23 KW POWER SUPPLY BAG SIZES - BASIC TUBE SIZE - FROM VFFS CAN VARY FROM: MINIMUM OF 195 mm FLAT BAG SIZE WITH L x W OF 150 MM (5.90") LENGTH x 45 mm (1.75") WIDTH AND MAXIMUM OF 390 mm FLAT BAG SIZE WITH L x W OF 255 mm (10") LENGTH x 135 mm (5.31") WIDTH BAG HEIGHT RANGE FROM: 150 mm MINIMUM TO 590 mm MAXIMUM. BAG FILL WEIGHTS RANGE FROM: 454 GRAMS ( 1 LB ) TO 4540 GRAMS ( 10 LBS ). DESIGNED PRODUCTION SPEED: 40 BPM ON MAXIMUM BAG SIZE. BAG TYPE: ALL BAGS ARE FLAT-BOTTOM STYLE WITH GUSSETS TUCKED; VERTICAL SEALS ARE 15 mm WIDE WITH CENTER FINS FOLDED RIGHT OVER LEFT; TOP & BOTTOM SEAL FLAPS ARE 15 mm HIGH WITH HORIZONTAL SERRATED CUT-OFFS. BAG MATERIALS ARE A HEAT-SEALABLE LAMINATE OR EQUIVALENT WITH FILM THICKNESS RANGE FROM 6-9 MILS AND SEALANT LAYER OF A LINEAR LOW DENSITY POLYETHELENE (LLDPE) 4-5 MILS. Overall equipment dimensions: 5400mm long x 1400mm wide x 2720mm high. Call (847)963-1201 for additional information.

Item

KC101572

Image
mouse-over to enlarge

Associations

Bag Sealer